Save up to 70% energy with Deetronix LED retrofit light lines
Making an affordable switch to business LED lighting can also be low-threshold. Replacing old fluorescent lighting with energy-efficient LED lighting is a smart way for large-scale consumers to significantly reduce energy costs.
Fits light lines from
Discover the Deetronix LED lighting module
Those who want to switch from the traditional Dutch fluorescent tube to LED light lines in a cost-efficient way can do so while retaining the original fluorescent fittings. A new light line module can be fitted in the existing voltage rail, simply in the original fluorescent tube fitting. We also call this process 'retrofitting'.
Our Deetronix retrofit LED light lines are specially designed to be installed in existing fluorescent light lines of almost every known brand and type of fluorescent tube. By reusing existing light lines, switching to LED immediately becomes a lot more attractive. After all, LED lighting uses up to 70% less energy per light source!
Deetronix light modules are an attractive way to switch to LED lighting:
- Direct up to 70% less power consumption for illumination
- Suitable for all common brands of fluorescent lighting light lines
- Noticeable better light quality and a bright environment
- Higher colour fastness for an optimum lighting experience
- Never bothered by annoying flickers
- Easy plug-and-play installation in just 5 minutes
- Choose the ideal light colour, adjust power with DIP switch
- To be used in combination with smart light sensors
- Fully compliant with all relevant labels and requirements
Retrofitting makes LED fun again
Are you a business owner dreading investing in LED lighting? Thanks to retrofitting, investing in sustainable business lighting becomes a lot more accessible. In fact, with Deetronix retrofit modules, only the fluorescent light fitting is replaced, while the existing fluorescent light line can be reused.
Reusing original fluorescent light lines (or voltage rail) is not only better for the environment, but also for your wallet. Companies that opt for efficient Deetronix LED light modules can thus make the switch to energy-efficient business lighting in a relatively inexpensive way.
By using Deetronix LED retrofit light line modules, the lighting remains compliant with the applicable NEN3140 standard. This is in contrast to actively converting a fluorescent luminaire to make it suitable for LED fluorescent lighting.
With Deetronix continuous-row modules you never afraid to zijn that you compromise on quality. The LED modules are superior to traditional Fluorescent lighting. Enjoy optimum light quality, flexibility, minimal energy consumption, and a life which is up to 5 times longer.
Deetronix: The future of lighting
The D-Lighted team has been successfully working on it for several years: an affordable solution that makes it possible for any entrepreneur to switch to economical LED lighting. After all, as classic fluorescent tubes are slowly but surely being phased out in the Netherlands, companies need to look for an alternative.
In practice, we also see that many first-generation LED fluorescent tubes are already in need of replacement. The Deetronix LED retrofit light line modules also offer many practical advantages over obsolete LED fluorescent lamps. For instance, many entrepreneurs get into a tangle with the CE mark, which is often dropped when converting. This is not the case with Deetronix LED retrofit continuous-row modules.
We know from experience that good business lighting is above all a balance between quality and price. To serve as many business customers as possible, we have therefore developed Deetronix LED modules. In them, sustainable business meets high quality lighting perfectly.
Why Deetronix LED retrofit modules?
Minimise your investment in LED lighting by old light lines of existing Fluorescent lighting reuse. You buy only the Deetronix LED retrofit light line module.
Deetronix modules fit most common Fluorescent types (T8 and T5). Geschikt for well-known brands such as Philips, Trilux, Veko, Norton, Zumbotel and Regiolux.
Save up to 70% energy per individual light source by switching on economical LED lighting technology, while enjoying superior light quality.
Ease of installation
Installing Deetronix LED light line modules is not complicated. Replacing an old fluorescent luminaire takes no more than 5 minutes. The system is fully Plug & Play and can be used immediately after installation.
Adjust light colour and power with a convenient DIP switch. Deetronix modules come standard with a sensor, which can be set from the ground with a remote control (works up to 12 metres high). Modules are suitable in combination with smart sensors such as LED dimmers, motion sensors, timers and detection sensors.
Besides saving energy, reusing the light line and connector for the light source is a good choice for the environment. Contribute to the circular economy and use parts that still work again. Not only does it encourage sustainable business practices, but the process also helps save precious raw materials.
In line with sustainability, longer life expectancy is also a factor. On average, Deetronix LED modules last up to five times longer than classic fluorescent tubes. This, too, is positive for the wallet and the environment.
The Deetronix LED module complies with all applicable standard norms and requirements for Dutch entrepreneurs (e.g. NEN 3140). The existing CE mark does not expire when the LED module is replaced. The light line module also features quality marks such as RoHS, CB, EMC (TUV), ENEC and LVD (TUV). The A-quality LIFUD driver is SELV approved. The lens is made of polycarbonate, making it shatterproof and HACCP-compliant (suitable for the food industry).
Deetronix retrofit LED light line modules can take a beating. They feature an IK impact resistance rating of 10. In addition, the retrofit LED module includes steel cable clips, which help prevent the module from falling out of a light line.
Quick return on investment
Using less energy makes a lot of sense in these expensive times. Entrepreneurs are large consumers of lighting: it makes sense for them to switch to light sources that are as economical as possible.
By switching from traditional fluorescent lighting to Deetronix LED light lines, you save a considerable amount of energy per light source. Energy savings of up to 70% per light source (compared to standard fluorescent tubes) are not uncommon here. When switching, installation costs are also greatly reduced thanks to the modules' great ease of installation.
Investment in Deetronix LED lighting is thus relatively quick to recoup (between 1 and 3 years is realistic). This is mainly due to the superior technology that LED technology possesses. Because these are retrofit LED modules, existing luminaires can be reused. Dut helps to reduce costs further.
The longer life of LED lighting should also not be underestimated in the cost equation. Because Deetronix LED light line modules last longer, there is less need to buy and install replacement lighting.
Order now and save directly on business lighting
Thanks to retrofitting, LED lighting is also within reach for the entrepreneur with a relatively small investment grant. Even if you have previous generations of LED modules, it is interesting to make the switch. Re-use your existing fluorescent light lines in combination with our high-quality, professional Deetronix LED light line modules.
This allows you to enjoy the best of both worlds. A sustainable investment that will quickly pay for itself, as well as a strong improvement in the quality of light in your premises(s). With energy savings per light source of up to 70%, switching is only logical.
So modernise today (LED) fluorescent tubes or old line lighting in your company. This allows you to make immediate energy savings, but also reap the benefits years into the future. Does something break down after years of use? No problem, the guarantee on Deetronix LED modules is valid for 7 years.